Joint It So Clean Masonry Patio Paving and Natural Stone Cleaner 5 Litre SOCL5 Joint-It Paving Latest Fashion

Joint It So Premium Clean Masonry Patio Paving and Natural Stone Cleaner – 5-Litre

MPN SOCL5

Barcode 5391535770038

5-Litre Trade Size

Joint-It So-Clean is a premium natural stone cleaner that can also be used on many masonry and concrete surfaces. This natural stone and concrete cleaner penetrates deep into the stone to lift out any dirt and stains that build up over the winter months and will leave a clean patio, and the driveway will even work on the tarmac.

Joint-It So Clean can be used on all surfaces, including natural stone and concrete paving, walls, paths, roofs, decking, tarmac, and block paving with this powerful high-performance cleaner, and it’s simply spray-and-go.

All you have to do is spray Joint-It So Clean on your patio, driveway or tarmac and leave it to do the work. There’s no scrubbing needed, take a look at the video.

Make those outside spaces come back to life. This natural stone and concrete cleaner penetrates deep into the stone to lift any dirt and stains, leaving a clean patio and driveway behind suitable for use on driveways, patios, tarmac, natural stone and concrete.

Specification and Main Points:

• 5-Litre Trade Size
• Ready to use formula
• Easy to apply by spray roller or brush
• Stain resistant
• It does not alter the appearance of the surface
• Safe on natural stone
• Suitable to use on driveways, patios, tarmac, natural stone and concrete paving, etc
• Powerful and effective
• Fast acting with long-lasting results
• It has the added benefit of being low odour

Click the button below to watch a demonstration video of So Clean from Joint It.

How To Use:

1. Always brush away leaves, debris and any heavy growth before treatment.
2. As with all cleaners, apply a small amount to a hidden area for testing.
3. Apply by spray. If the wind is up, apply by brush or roller
4. Do not apply if rain is expected within 4 hours.
5. Use a low-powered pressure spray such as a pump sprayer, lance or trigger spray, roller or brush and apply so clean to the point of saturation, i.e. flooded.
6. Leave the product to work
7. There should be visible improvement within 24 hours.

For dirty and heavily soiled surfaces, apply the product neat and agitate into the surface with a brush, power wash after the water has dissipated, and reapply and leave to work.

Coverage depends on a lot. This depends on the porosity, type and texture of the surface.

As with all cleaners, we highly recommend testing a small hidden surface area to determine the required quantity and suitability. The more porous the stone, the more product you will need.

An Approximate General Guide:

• Heavily soiled areas 3 metres square per litre
• Lightly soiled areas 5 metres square per litre

Approximate Consumption:

The manufacturer offers a handy tool for calculating your usage.

Here’s the link for the Joint It calculator. Click on the So Clean tab at the top of the calculator and input your information.