Joint it Supreme Colour Enhancer Sealer Paving Natural Stone Concrete 5 Litre SUPC5 Joint-It Paving Large Choice

Joint it Supreme Colour Enhancer Sealer Paving Natural Stone Concrete – 5-Litre

MPN SUPC5

Barcode 5391535770076

Trade Option 5 Litre Tub

Joint-It Supreme Colour and Enhancer sealer is an excellent product for protecting your patio, driveway, or other paving surfaces. It’s ECO-friendly and can be used on various materials, including concrete, natural stone, and brick. It creates an invisible barrier against dirt, stains, moss, and algae and helps to keep your surface looking clean and new. This sealer is unsuitable for non-porous surfaces like porcelain, as it has almost no absorbency.

With enhanced durability, this product can last longer and reduce maintenance time. It also keeps your surface looking new all year round!

It enhances colour and protects dark surfaces, so they stay darker than lighter ones. It is essential when treating natural stones like marble or granite because these materials are susceptible to stains.

It acts as a sealer. It penetrates the stone to keep out dirt and grime, just like a premium seal.

Benefits Of Using Supreme Colour Enhancer:

• 5-litre trade tub
• Resistant to graffiti
• Repels moss and lichen formation on the surface
• Eco-Friendly
• It keeps surfaces looking new and long-lasting
• Breathable
• Quick Drying
• Stain Resistant and Waterproof
• Intensifies Colour
• Ready-to-use formulation

Joint-it supreme colour paving sealer is a simple spray-and-go formula that means you can apply it to the surface of your stones or concrete without worrying about getting any on yourself. Plus, you can use a roller or brush if there are windy days when applying this!

Supreme Colour Enhancer Approximate Usage

The manufacturer provides a simple calculator to determine your usage.

Here is the Joint It Calculator. Click on the Joint It Premium tab at the top of the page and provide your details.

Video of the Joint It Colour Enhancer being used to colour a patio with a simple pump sprayer

Joint-It Supreme Colour Enhancer is not only an eco-friendly but also an effective combined colour enhancer and sealer for natural stone surfaces, including paving stones.

It can be used to make your home’s exterior look new again by stopping dirt from penetrating the surface of any building materials such as roof tiles or walls!

With this product, you’ll get both enhancements that will enhance their original colour and protection against outside elements like water damage, which would eventually crumble over time if left unchecked.

The most significant thing is that dirt stays on the surface and not within it, which makes Joint-It Supreme Colour Enhancer a great colour enhancer for stones. The dirt will never get into the stone after the Joint-It Supreme Colour Enhancer has been applied, but you may occasionally need to clean the top of the stone because of how it has been treated.

Sealers, on the other hand, tend only to cover the surface, and as time goes by, surfaces become permeable, allowing dirt and pollutants to enter the stone or concrete. A superior colour Enhancer won’t accomplish this.

Joint-It Colour Enhancer is VOC-free and composed of chemically inert material, making it entirely water-based.

A Note On Efflorescence

There’s no need to wait for efflorescence to appear once you’ve applied Joint-It Supreme Colour Enhancer because the water in the sealer draws the efflorescence out of the stone. When this happens, you may brush it off, thus preventing any moisture from remaining on your surface. There is also no reason for concern about staining due to natural salts or a build-up in colour.

Question: When Can I Use It?

There’s no need to wait weeks or months after you’ve finished the jointing procedure. Joint-It Supreme Colour Enhancer may be used immediately.

It is the complete solution for all your colour-changing needs. Not only does this breathable formula allow stones to dry during and after application, but it also ensures that they stay vibrant longer!

The porosity and texture of the surface will determine how much coverage it receives.

To be effective, all surfaces must be treated to saturation in 1-3 applications, depending on the substrate. To calculate accurate consumption, treat a little hidden region in each application.

• General coverage guideline
• Architectural concrete 5 metres square per litre
• Block paving 5 to 8 metres square per litre
• Porous natural stones such as limestone, sandstone, and slate are 2 to 5 metres square per litre.
• Low porosity stone such as granite, marble, and terracotta, 8 to 16 metres square per litre

Highly Porous Natural Stone

When laying paving on slabs made of slate, black, blue limestone, or honed black granite, we recommend using Joint-It Supreme Colour Enhancer as a colour enhancer.

If you want to keep any of the colours of Joint-It Simple out of porous stones, they should be pre-treated.

Question: When Will You Be Able To Walk On The Surface?

In dry situations, 4 hours is the average time to return to the surface once it looks ready.

Before Application

Remove any surface dust, dirt, oil, efflorescence, organic growth, coatings sealers, and old paint films. Surfaces should be totally dry, clean, and free of dust and debris.

• Before applying it, all algae and mould should be dealt with.
• Before using the surface, cracks and maintenance work should be addressed.
• Pressure washing at lower pressures (up to 2500 psi) and using a disinfectant solution is suggested.

To get the most out of Joint-It Supreme Colour Enhancer, clean your surface thoroughly with Joint-It So Clean before applying it to ensure that all pores are fully penetrable and dirt and stains are removed.

Question: Is It Possible To Use The Sealer On A Previously Sealed Surface?

If the surface has not been treated, pour a steady stream of water onto it and see whether it soaks in. There’s no sealer if the water absorbs into the surface, and you can use Joint-It Supreme Colour Enhancer if this is the case. If droplets form on the surface, this indicates that there is a sealer in place, which must be removed before applying Joint-It Supreme Colour Enhancer.

Limitations and Application:

• Do not apply within four hours of expected rain or in wet, damp situations.
• Before beginning work, always test a tiny hidden spot. Do not add water to this product.
• Another method is spraying using a low-pressure roller or brushes to the saturation point. Make sure the treatment is applied from bottom to top on vertical surfaces.
• Once the base coat is dry, you can apply a second layer if needed. Make sure not to let it run, and as soon as your substrate has absorbed that first coat, add another one for good measure!
• Between applications, avoid allowing the product to dry.
• The effectiveness of your product will begin to work immediately and may take up to 7 days to achieve full efficacy. After you’ve completed, clean equipment and tools with water right away.
• Because Joint-It Supreme Colour Enhancer is absorbed into the substrate to function, non-porous surfaces are not compatible. This product must be absorbed into the surface to work; however, porcelain has virtually no absorbency.
• In the original container, please keep it in a cool, dry location between 5 degrees C and 30 degrees C.