Sika Clear Resin Seal Block Paving Sealer 5 Litre
MPN: SKBLOCKS5
Barcode: 5055047206330
Enhancing surface sealer for block paving.
Clear Resin that impregnates and seals block paving.
Sika Resin Block Paving Sealer Resists Oil and diesel & improves enhaces the overall appearance of the block paving.
Helps to resist the staining and build up of dirt grease and oils from motor vehicles.
Uses:
Vehicle and pedestrian areas
New and existing drives
Forecourts
Parking areas
Walkways and paths
Coverage – Usage Approximately 5 to 8 meter square per Litre
Advantages and Characteristics:
Simple and quick to apply
Low odour
Enhances appearance
Easier to clean and maintain
Resistant to oil and diesel spillages
Colour:
Clear
Sealer Application:
For new areas, remove all loose material by brush and or vacuum.
Ensure joints are filled with compacted kiln dried sand such as Sika Setting Sand Narrow Joint Filler.
For existing areas, remove all oil grease & diesel stains.
Remove weeds, algae etc with a product like Everbuild Patio Wizard.
Ensure all areas are completely dry before applying Sika Block Paving Seal.
Treating perimeter first apply the first coat by roller, spreading liberally and uniformly avoid leaving puddles.
Always ensure a wet edge is maintained to avoid a striping effect.
Apply the second coat at right angles to the first maximum of 24 hours between coats.
Allow at least 6 hours before pedestrian traffic and 24 hours for vehicle traffic.
Always do a small test before coating a complete area.
Approximate Consumption:
5 to 8 meters square per litre.
2nd coat will go much further than the first.
See All Sika Products
Sika Official Information:
Sika Block Paving Seal Sealer Technical Data Sheet
Sika Block Paving Seal Sealer Safety Data Sheet
Sika Manufacturer Page
“Important Note this is a non returnable product “
While in our care all products are kept in a climate controlled store room.
We recommend storing this product out of direct sunlight until used.
Reviews
There are no reviews yet.