Sika Sikaflex Primer 206 G+P Glass Plastic Metal 250ml Top Sellers

Sika Sikaflex Primer 206 G+P Glass Plastic and Metal 250ml

Option: SP206GP-250

Barcode: 7611237098635

Primer-206 G+P is a black, moisture-curing liquid primer specifically formulated for the treatment of bond faces in direct glazing work prior to application of Sika

polyurethane direct glazing adhesives.

Areas of Application:

• Sika Primer 206 G+P is used to give improved adhesion on glass and ceramic-coated glass in adhesive bonding applications.
• Sika Primer 206 G+P can also be used on other substrates such as plastics and some metals
• Black UV block primer for mineral glass, to be used in conjunction with Sika Activator.
• Can Also be used on stainless steel as well and two part epoxy – polyurethane paints
• It is also used as a general purpose primer which is used to promote adhesion to glass, FRP, ABS, plastics, aluminum, steel and paints

Method of Application:

• Surfaces must be clean, dry and free from all traces of grease, oil and dust.
• Wipe the bond face with Sika Aktivator and leave to dry.
• Shake the can of Sika Primer 206 very thoroughly until paint mixing ball is heard to rattle freely.
• Continue shaking for an other minute and apply a thin but covering coat with a brush or felt pad.

Notes:

Do not apply at temperatures below 10C or above 35C. Sika Primer-206 G+P should be applied once only.

Care must be taken to ensure that this single application gives adequately dense coverage. Reseal container tightly immediately after use.

Application Temperatures +10C to +35C

Coverage 150 ml per m2 approx.

Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

“”Important Note this is a non returnable product “

while in our care all primers are kept in a climate controlled store room.

a primer returned can not be re-sold.