Sika Sikafloor 131 Latex Ultra Self Levelling Compound 40 Bag Pallet Latest Fashion

sika SikaFloor 131 Latex Ultra Lay Self Levelling Resurfacing Compound

Trade Option 40 Bag Pallet

code: SKLEV30ULT25-40

Barcode: 5055047210726

Trade discounted pallet deal Sika sikafloor 131 Latex Ultra is aultra high strength high performance, Latex modified cement basedpowder this is a direct replacement for sikalevel 30

which when mixed with water, can be used to level out uneven floors and screeds internally and for some external applications.

Suitablefor some exterior applications such as sheltered balconies andwalkways, prior to laying ceramic tiles, slabs and natural stone.

sika floor 131 self levelling can be overlaid with common floor coverings or left as a final wearing surface.

Sika 131 will even accept light vehicular traffic.

May be applied in one coat from 2 to 10mm in depth 25mm when filled.

Accepts foot trafic within 2 hours and can be tiled on with in 3 hours.

Typical surfaces include concrete and screed, existing unglazed ceramic tiles, brick, stone etc.

When mixed as directed, the compound provides a free flowing mix.

For levelling and smoothing concrete and screed floors where a heavy duty floor topping is required.

Features and Benefits:

Fast setting, foot trafficable within 2 hours, can be tiled within 3 hours

Interior and exterior use

Can withstand light vehicular traffic

Final wearing coat,

Over-paintable

Water and frost resistant

Application depth 2-10mm

Instructions for Use:

Preparation of Substrate:

Wet or humid rooms, such as bathrooms, SikaLevel-30 Latex Ultra should be covered with a damp proofing membrane such as SikaBond Rapid DPM.

Switch off any underfloor heating systems 24 hours before and after application. Ensure floor temperature is 5 deg c

Floors to be treated must be free from grease, dust and loose particles.

Existing concrete screeds must be a minimum of 4 weeks old before applying this product.

Always prepare floors by dampening with water then priming with PVA diluted 1 part PVA to 3 parts water to give a sound slightly damp surface.

Internally surfaces should be primed using sikabond PVA+.

Externally surfaces must be primed using Sika SBR Bond.

Always See Datasheet regarding priming.

Manufacturer Data Sheets

Sika Sikafloor 131 Declaration Of performance

Sika Sikafloor 131 Safety Data Sheet

Sika Sikafloor 131 Technical Data Sheet

131 Manufacturer Product page

Product Application:

Read Product Technical Datasheet

Approximate Coverage:

25kg of Sikafloor 131 mixed with 5 litres of water will cover approximately 5m2 at a depth of 3mm depending on substrate .

DO NOT USE EXCESS WATER

“Important Note this is a non returnable product “

while in our care all products are kept in a climate controlled store room.

because this is a reactive product we could not resell the product if returned.

The Product should be stored out of direct sunlight until used