Soudal Mitre Bonding Kit Superglue 100g Activator 400ml Large 130623 Hot Sale

Soudal Mitre Bonding Kit Superglue 100g Activator 400ml Large Jumbo Trade kit

Mitre Super Glue 100g Mitre Activator 400ml

Barcode 5411183143036

MPN 130623

Soudal mitrebonding kit superglue and activator Large Jumbo size kit

Two part super glue system comprising an extremely high viscosity ethyl cyanoacrylate adhesive 100g and 400ml aerosol activator.

Used primarily for instant bonding  normally 10 seconds on wooden joints, with numerous other uses.

This Mitre Bonding Kit is a set consisting of a high viscosity cyanoacrylate adhesive super glue and activator which when used together create a rapid 10 seconds bond, high bond strength is achieved.

Soudal Bonding Mitre Kit Benefits

• Large Kit 100g superglue 400ml Aerosol
• Ideal for wood mitre joints as well as numerous other jobs.
• Ideal for use on vertical surfaces as it will not drip or slump.
• Mitre MDF kit is particularly suited to bonding difficult substrates which have a porous or uneven nature.
• Flash setting formulation bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
• High viscosity adhesive low soak in to give greater bond strength than conventional cyanoacrylates on porous surfaces such as wood
• Gap filling high viscosity adhesive will fill small gaps in mitres etc
• Especially suitable for applications where cure speed needs to be accelerated.
• Maximum strength is achieved in 24 to 48 hours

Activator 

• 400ml
• Solvent based aerosol activator
• Activates super glue
• Non-yellowing
• Reduces bloom and odour

Superglue

• 100g
• Professional quality cyanoacrylate based Super Glue
• High viscocity
• High strength
• Super fast curing adhesive
• Suitable for non-porous surfaces
• Thrixtropic

uses

• Fixing and repairing wooden parts.
• Multitude of industrial applications Bonds MDF, wood, chipboard, rubber, leather, plastics, Perspex, UPVC ceramics, aluminium and metals.
• Ideal for all cornice and profile mitres, trims, picture frames, MDF, skirting and architrave joints, worktop end strips, PVCu trims and much more.
• It is particularly useful for production lines such as electronics assembly and uPVC window trim bonding.

Directions

1. Ensure all surfaces are clean, sound, dry and free from dust, grease or other contaminants.
2. Substrates need to be smooth and have a perfect connection area.
3. Spray the activator over one of the surfaces.
4. Apply a drop or line of the adhesive to the other.
5. Join substrates together immediately and press firmly for 10 seconds to one minute depending on materials.

Application temperature for applying the mitre kit should be between +5 degrees C and +35 degrees C.

Always read the data sheet prior to use for limitations.

Also Available in Standard Size Kit