Soudal Soudaseal Hybrid Mirror Adhesive 117339 Box of 12 Special Offers

Trade Discounted Option Box of 12

Soudal Soudaseal Hybrid Polymer Mirror Adhesive Light Grey 290ml Cartridge

MPN 117339 

Barcode 5411183083035

Soudal Soudaseal Box of 12 mirror adhesive is a high performance premium hybrid polymer non staining sealant and adhesive a solvent free adhesive thats safe for mirror backing.

Specifically designed for adhering most common mirrors to all common substrates developed so that it does not attack the backing of the mirror.

Soudal solseal is a solvent free adhesive specially formulated for bonding mirrors and difficult materials such as metals, plasterboard, timber, fibreglass and to most other common surfaces and will even bond to damp surfaces

Will not attack the mirror backing and is fast curing and is virtually odourless.

Used for the Internal fixing of mirrors, coated glass and glass splashback’s

Can be used to seal the edge of the mirror once the mirror has been installed and after the mirror adhesive has had the full time to cure.

Soudal Soudaseal Mirror Adhesive Also Available in Singles

Benefits

• Trade Option Box of 12
• Hybrid Polymer adhesive system
• Will not attack mirror backings
• Solvent Free
• Primer less adhesion to most surfaces Sticks to metals, most plastics, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc.
• Non Hazardous
• Resistant to mildew and mould growth
• Moisture Cured
• Tack free in 10 minutes
• Fully cured in 24 to 48 hours
• Permanently elastic after curing
• Temperature resistant -40 degree c to 90 Degree c
• Application temperature  5 degree c to 35 degree c
• Very low emission, EC1 PLUS R certified

Application

Important always apply in verticle lines to avoid the build up of moisture across the joint the moisture buildup would possibly damage the mirror backing over time.

Before bonding the backcoating of the mirror should be checked for damages eg scratches. Do not apply adhesive to a damaged mirror.

Apply product with the enclosed triangular nozzle in vertical beads to the back of the mirror.

Depending on the dimension and weight of the mirrors, beads should be placed at equal distances between 10 to 20cm from each other.

Use a double sided mirror tape for an initial tack and to create the necessary ventilation behind the mirror.

Do not seal the mirror edges until the mirror adhesive is fully bonded, mirror adhesive is moisture cured from the air.

Always read the technical data sheet prior to use.

Mirror & Glass Screws

All Mirror and Glass Splash Back Adhesives